You could be wondering how to start my car without chip key after you made a spare key at your local locksmith, even though the key is identical to the original. Even though your original key doesn’t have any remote lock functions, it still has a transponder chip concealed inside the plastic that acts as an extra layer of anti-theft protection.
Unfortunately, starting an automobile without the transponder chip is impossible. If you need to use many keys but only have one chip, there is a technique to make them all work. Read the article below to learn the technique.
Table of Contents
How To Start My Car Without Chip Key?
To start your car, try one of the ways below. These choices will keep you going until you can find a spare key or get a new set made by a locksmith.
1. Directly Start The Car
Once you’re inside, starting your car is simple. Most automakers anticipate the need for keyless ignition if the fob fails, thus a system has been designed to function even if the remote is broken. Most cars have a manual start option, and some have key fob-integrated options that work effectively without a key.
Even if your vehicle has a keyless entry, there is a key slot near the steering column that you may not be aware of. This is how Mazda automobiles are equipped. Toggle the “switch,” which is a plastic cap that covers your keyhole.
2. Drill And Screwdriver
Using a screwdriver and drill to turn your car’s ignition is the quickest and most popular approach. However, you must exercise extreme caution to avoid causing injury to the ignition. This is the best way to use it if you need to deactivate the lock mechanism. The car key mechanism, on the other hand, will be severely ruined.
Drill your keyhole starting at the inner flap position if you use this method. It’s probably about 2/3 inches long. The drill and lock bits must then be removed. By inserting the screwdriver head, you can now attempt to start the car.
If you don’t have a screwdriver, any metal object will suffice.
3. Hotwiring
Another way to start a car without a key is to hotwire it. The Hotwiring approach is ideal for autos constructed in the 1990s.
- To use this approach, you must first remove the plastic cover from the steering helm column. Because both sides are secured by screws, you must remove them first.
- This will grant you access to the ignition system. Make sure you’re wearing your insulated or protective gloves before moving on to the next level.
- Pay close attention to the battery wires and starter now. The battery wires are commonly represented as red lines. The ignition, on the other hand, is controlled by the brown and yellow cables.
- Make a little insulating incision in the cables of your battery.
- Cut the cables that run from your cylinder as soon as possible.
- Finally, twist the ends of the battery cables and the wires together.
4. Coil Cable In Red
This strategy is only for land vehicle enthusiasts who have a good level of technical knowledge. If you had the skills of a competent technician, you could, for example, start your car without the key.
- To begin, search beneath the hood of the car for the cable. First, get the jump starter cord.
- Then, using the red coil cable, connect the positive terminal of the battery to the positive terminal of the battery. This cable is also referred to as the coil’s positive side.
- At this time, the dashboard should have received some power. Continue this method by unlocking your steering wheel to find the starting solenoid.
- Keep in mind that this solenoid should be connected to the battery’s positive terminal.
- Remove the switch wire from the solenoid wire. After that, shortchange the solenoid’s positive post around where the wire harness is fastened with a screwdriver.
This technology allows you to automatically feed 12 volts to your car’s battery. The solenoid permits the starter to turn on the car once it has been initiated.
Frequently Asked Questions:
Here are some frequently asked questions about how to start my car without a chip key:
1. Is It Possible To Start My Car Without A Chip key?
Without the chip key, it is impossible to start an automobile. Use a smartphone app to get started, or call your car’s manufacturer’s on-road help service. Depending on how the new key is manufactured, the only other options are to tow the vehicle home or to the nearest dealership.
2. How Can You Know If Your Car key Has A Chip?
Take the key apart and check for a little chip in the shape of a tube or a black square, or read the owner’s instructions.
3. Without A key Fob, How Do You Start A Push-Button Car?
If you’ve misplaced all of your key fobs, the only option is to use a phone app to remotely open and start the vehicle. If it doesn’t work, you’ll need to purchase a new key. If you’re asking this question because the battery in your keyless fob has died, there’s one more thing you can do.
Locate the remote’s corner that appears to be able to be pulled off. The majority of people are unaware that a keyless remote can still have a metal key inside as a backup. After you’ve taken it out, put it back in the remote in reverse to make a standard key. If you’ve misplaced all of your key fobs, your only option is to use the remote.
4. Is It Better To Use The Start Button Or The Push Button?
Although the technology for the push button start has substantially improved, the tradeoff remains the same. You get convenience and safety with a push button, but a traditional key start is still deemed more trustworthy. Ignition locks, as we’ve shown in this article, can also fail, which is why I think the push button is a superior alternative overall.
Conclusion
It won’t be feasible to start the automobile without the transponder chip, but at least you’ll know how to get inside your vehicle without it. If you found this article helpful about how to start my car without chip key, I recommend checking out our other articles and reviews to learn more about auto care and repairs, as well as innovative methods to save money!