My Push Start Car Won’t Start, What To Do Now?

Automobiles, either modern or used, can make errors to start. It’s usual to turn the key or push the ignition button and discover that none of it occurs and you won’t be driving anywhere, but realizing what’s generating the trouble might help you take the proper action.

When you’re going to an important job interview, for example, or when you’re heading to hang out with friends who already think you’re usually late. Instead of getting to your desired location, you’re stuck wondering why my push start car won’t start. There is no clear solution to this issue, though. An engine may refuse to start for a variety of reasons. We’ll go over a few of the more prevalent causes below, just because you’re curious.

Reasons Why My Push Start Car Won’t Start?

Push-button start, commonly referred to as keyless entry as well as other similar terminology, enables you to proceed with your automobile without trying to dig through your wallet or handbag for your keys. If your engine does not start when you press the start engine button, one of the following problems could be the cause:

1. System Startup Issues

The main components of the starting system are the battery and starter motor. The battery drives the ignition switch, which turns the engine as you press the key in the ignition.

From a low battery to a faulty starter motor, any problem in this system can prohibit your automobile from starting. Your charge may have ended if you begin your car but don’t see the splash lights come on or sound the engine turn over. (Check for broken or non-functioning headlights as well.)If the car is feeling generous, it may show the battery symbol, which is a good indication of where the problem is.

2. The Battery In The Key Fob Has Died

If you have a push-button system and nothing occurs when you push “Start,” it’s probable that your key fob is responsible. To work, the button needs a sign from the key fob, which it won’t get if the key fob’s battery is expired. Replace the battery in the fob. Many car manufacturers, however, deploy a physical key concealed in the fob or a battery-free identifier until then.

3. Ignition System Malfunctions

Spark plugs activate the air/fuel mixture inside your car’s engine. The explosions set internal engine elements in action, providing the rotational force needed to move your car along the street.

The spark plugs, on the other hand, are not a one-man show. They’re only one component of the ignition system, which also includes coil packs, sensors, and a control module. Your car may not start due to a problem with one or more ignition system components.

4. Internal Engine Malfunctions

The above-mentioned starter is a small electric motor that drives a pinion gear. The pinion gear engages a toothed wheel (either a flywheel or a flex plate) on the back of the engine when you turn the ignition key to the start position. To turn the engine over and start it, the teeth of the gear and wheel mesh.

The starter motor will not be able to turn the engine over if it is seized due to an internal failure, such as a broken connecting rod. You’ll also be stuck with a car that refuses to start or crank.

What To Do If Your Car Won’t Start?

There are a few things to look into if a push start car won’t start when you press the start button. Steps are taken when using the Push Button Start. You’ll know why the car won’t start once you figure out where things go wrong.

1. Tap On The Battery Terminals And See What Happens

When you’re stranded without tools, there’s no way to clean corroded battery terminals. However, you can try moving or jarring the terminals enough to improve contact. If the car won’t start, smack each battery terminal with the heel of a shoe to rotate it slightly around the battery post. Then attempt to start the engine.

2. Open The Key Fob And Search For Hidden Key

A mechanical backup is always a good idea, and some automakers include a physical key inside the remote fob that can be popped out and used to jumpstart the vehicle’s battery in an emergency. On some vehicles, the car start button can be removed to reveal a key slot beneath it, while others hide the key slot behind a round panel on the steering column, where it would normally be. For more information on where to find your mechanical key slot, consult your vehicle manual.

3. Press The Key Against The Button

Near-field communications, or NFC for short, is used by the majority of car start button systems. Near-field requires that the key be placed close to the receiver in the steering column for it to function properly. If the key is in your pocket, a dead battery in the fob can prevent the vehicle from starting. If you press it against the button, the signal is usually strong enough to make contact with the key and start the engine. Then you can go out and buy a new battery or go to the dealership and get a new fob.

4. Try Jump Start Your Vehicle

Your car may have a dead battery if your fob works but your engine won’t start. Check the battery voltage with a voltmeter to make sure this is the issue. If the battery voltage is less than 12.4 volts, the car will not start. You can either use a charger or get a jump start from another vehicle.

Frequently Asked Questions:

Here are some Frequently asked questions concerning why my push start car won’t start:

1. When Your Push-Button Car Won’t Start, What Should You Do?

Image of a push-button car that won’t start
Your car may have a dead battery if your fob works but your engine won’t start. Check the battery voltage with a voltmeter to make sure this is the issue. If the battery voltage is less than 12.4 volts, the car will not start.

2. How Do You Jumpstart A Car That Has A Push-Button Start?

Image of a push-button car that won’t start
Simply hold the FOB up to the push to start button and press the button with your foot on the brake to start the car in most makes and models.

3. How Can I Tell If The Battery In My Key Fob Is Low?

How do you check the battery in the fob? A key fob in many cars has a small LED light that illuminates when any of the fob buttons is pressed. If the LED light does not illuminate at all, the fob battery is dead or the fob has another issue.

4. When Your Car Won’t Start But All Of The Lights Come On, What Should You Do?

If your headlights turn on but your car won’t start, it means your battery is charged but the starter or ignition is malfunctioning. A starter engine can be jumped using a charged battery if the starter or ignition is the issue.


Your car start button is a convenience that allows you to leave your key or fob in your pocket and start the engine as soon as you get into the driver’s seat. However, as with all modern automobile features, there’s a chance you’ll press the button and nothing will happen. Simply contact a professional and tell him that my push car won’t start. It can be difficult to diagnose a no-start condition these days. And getting the job done requires someone who knows what they’re doing.

Leave a Comment